2w005g thru 2w10g document number 88528 08-jul-05 vishay semiconductors www.vishay.com 1 ~ ~ case style wog glass passivated single-phase bridge rectifier major ratings and characteristics i f(av) 2.0 a v rrm 50 v to 1000 v i fsm 60 a i r 5.0 a v f 1.1 v t j max. 150 c features ? ul recognition, file number e54214 ? ideal for printed circuit boards ? typical i r less than 0.5 a ? high case dielectric strength ? high surge current capability ? solder dip 260 c, 40 seconds typical applications general purpose use in ac-to-dc bridge full wave rec- tification for power supply, adapter, charger, lighting ballaster on consumers and home appliances appli- cations mechanical data case: wog epoxy meets ul-94v-0 flammability rating terminals: silver plated (e4 suffix) leads, solderable per j-std-002b and jesd22-b102d polarity: as marked on body maximum ratings ratings at 25 c ambient temper ature unless otherwise specified. parameter symbols 2w005g 2w01g 2w02g 2w04g 2w06g 2w08g 2w10g units maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current at 0.375" (9.5 mm) lead length (see fig. 1) i f(av) 2.0 a peak forward surge current single sine-wave superimposed on rated load i fsm 60 a rating for fusing (t < 8.3 ms) i 2 t 15 a 2 sec operating junction and storage temperature range t j , t stg - 55 to + 150 c
www.vishay.com 2 document number 88528 08-jul-05 2w005g thru 2w10g vishay semiconductors electrical characteristics ratings at 25 c ambient temper ature unless other wise specified. thermal characteristics ratings at 25 c ambient temper ature unless other wise specified. notes: (1) thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length p.c.b. mounting ratings and characteristics curves (t a = 25 c unless otherwise noted) parameter test condition symbols 2w005g 2w01g 2w02g 2w04g 2w06g 2w08g 2w10g units maximum instantaneous forward voltage drop per leg at 2.0 a v f 1.1 v maximum dc reverse current at rated dc blocking voltage per leg t a = 25 c t a = 125 c i r 5.0 500 a typical junction capacitance per leg at 4.0 v, 1 mhz c j 40 20 pf parameter symbols 2w005g 2w01g 2w02g 2w04g 2w06g 2w08g 2w10g units typical thermal resistance per leg (1) r ja r jl 40 15 c/w figure 1. derating curve output rectified current figure 2. maximum non-repetitive peak forward surge current per leg ambient temperature (c) average forward output current (a) 0 25 50 75 100 125 150 0 0.4 0.8 1.2 1.6 2.0 2.4 p.c.b. 0.375" (9.5 mm) copper pads 0.22 x 0.22" (5.5 x 5.5 mm) capacitive load 5.0 10 20 = i (pk) i (av) 60 h z resistive or inductive load (per leg) number of cycles at 60 h z peak forward surge current (a) 0 10 20 40 50 60 30 100 10 1 1.0 cycle t a =25c single sine-wave figure 3. typical forward characteristics per leg figure 4. typical reverse leak age characteristics per leg instantaneous forward voltage (v) instantaneous forward current (a) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.1 1 10 20 t j =25c pulse width = 300 s 1% duty cycle percent of rated peak reverse voltage (%) instantaneous reverse current ( ? ) 0 20 40 60 80 100 0.01 0.1 1 10 100 t j = 100 c t j =25c t j = 125 c
2w005g thru 2w10g document number 88528 08-jul-05 vishay semiconductors www.vishay.com 3 package outline dimensions in inches (millimeters) figure 5. typical junc tion capacitance per leg reverse voltage (v) junction capacitance (pf) 100 0.1 1 10 1 10 100 t j =25 c f = 1.0 mh z vsig = 50mvp-p figure 6. typical trans ient thermal impedance t, heating time (sec.) transient thermal impedance (c/w) 100 0.01 0.1 1 10 100 0.1 1 10 0.220 (5.6) 0.160 (4.1) 0.388 (9.86) 0.348 (8.84) 0.032 (0.81) 0.028 (0.71) 1.0 (25.4) min. 0.060 (1.52) 0.020 (0.51) 0.348 (8.84) 0.308 (7.82) 0.220 (5.6) 0.180 (4.6) 0.220 (5.6) 0.180 (4.6) case style wog
|
